- Issue Time
Probably not. Bar codes are inexpensive and effective for certain tasks. It is likely that RFID and bar codes will coexist for many years.
Are there any health risks associated with RFID and radio waves?
RFID uses the low-end of the electromagnetic spectrum. The waves coming from readers are no more dangerous than the waves coming to your car radio
Why is RFID better than using bar codes?
RFID is not necessarily "better" than bar codes. The two are different technologies and have different applications, which sometimes overlap. The big difference between the two is bar codes are line-of-sight technology. That is, a scanner has to "see" the bar code to read it, which means people usually have to orient the bar code towards a scanner for it to be read. Radio frequency identification, by contrast, doesn’t require line of sight. RFID tags can be read as long as they are within range of a reader. Bar codes have other shortcomings as well. If a label is ripped, soiled or falls off, there is no way to scan the item. And standard bar codes identify only the manufacturer and product, not the unique item. The bar code on one milk carton is the same as every other, making it impossible to identify which one might pass its expiration date first
How does an RFID system work?
An RFID system consists of a tag, which is made up of a microchip with an antenna, and an interrogator or reader with an antenna. The reader sends out electromagnetic waves. The tag antenna is tuned to receive these waves. A passive RFID tag draws power from field created by the reader and uses it to power the microchip’s circuits. The chip then modulates the waves that the tag sends back to the reader and the reader converts the new waves into digital data
How do I know which frequency is right for my application?
Different frequencies have different characteristics that make them more useful for different applications. For instance, low-frequency tags are cheaper than ultra high frequency (UHF) tags, use less power and are better able to penetrate non-metallic substances. They are ideal for scanning objects with high-water content, such as fruit, at close range. UHF frequencies typically offer better range and can transfer data faster. But they use more power and are less likely to pass through materials. And because they tend to be more "directed," they require a clear path between the tag and reader. UHF tags might be better for scanning boxes of goods as they pass through a bay door into a warehouse. It is probably best to work with a consultant, integrator or vendor that can help you choose the right frequency for your application
Do all countries use the same low-, high and ultra-high frequencies?
Most countries have assigned the 125 kHz or 134 kHz area of the radio spectrum for low-frequncy systems, and 13.56 MHz is used around the world for high-frequency systems. But UHF RFID systems have only been around since the mid-1990s and countries have not agreed on a single area of the UHF spectrum for RFID. Europe uses 868 MHz for UHF and the U.S. uses 915 MHz. Until recently, Japan did not allow any use of the UHF spectrum for RFID, but it is looking to open up the 960MHz area for RFID. Many other devices use the UHF spectrum, so it will take years for all governments to agree on a single UHF band for RFID. Government’s also regulate the power of the readers to limit interference with other devices.
How much information can the tag store?
It depends on the vendor and the application, but typically a tag would carry no more than 2KB of data—enough to store some basic information about the item it is on. Companies are now looking at using a simple "license plate" tag that contains only a 96-bit serial number. The simple tags are cheaper to manufacture and are more useful for applications where the tag will be disposed of with the product packaging.
What are some of the most common applications for RFID?
RFID is used for everything from tracking cows and pets to triggering equipment down oil wells. It may sound trite, but the applications are limited only by people’s imagination. The most common applications are tracking goods in the supply chain, reusable containers, high value tools and other assets, and parts moving to a manufacturing production line. RFID is also used for security (including controlling access to buildings and networks) and payment systems that let customers pay for items without using cash
What is the read range for a typical RFID tag?
The read range of passive tags (tags without batteries) depends on many factors: the frequency of operation, the power of the reader, interference from metal objects or other RF devices. In general, low-frequency tags are read from a foot or less. High frequency tags are read from about three feet and UHF tags are read from 10 to 20 feet. Where longer ranges are needed, such as for tracking railway cars, active tags use batteries to boost read ranges to 300 feet or more.